|
Peg Squat Rack
|
|
MSRP: $2,320.00
Price: $1,849.99
You Save: $470.01 (20 %)
Personalization
* denotes required field
Frame Colors*
|
Peg Squat Rack86"L x 48"W x 71"H. 410 lbs. Bars and plates sold separately.
| Equipment Specifications
|
- Frames: All equipment is machined to a minimum tolerance of +/- .030". The all-welded construction is primarily 3" x 3", 4" x 2", or 3" x 2" with 11-gauge steel and a combination of other heavy structural tubular steel.
- Frame Finish: Powder-coated baked on finish that is scuff resistant and long wearing.
- Padding & Upholstery: Padding is 2" thick virgin foam with a density of 12 lbs./cu. ft. Upholstery is 32 oz. Sulfide-stain resistant Naugahyde. All pads are top double-stitched.
- Bearings: Input and movement arms rotate with either nonfriction roller bearings with Basic Radial Load Rating of 2,420 lbs., contained in a custom cast and machined housing or a self-lubricating bronze bushing in a machined steel housing to provide smooth movement and precise alignment.
- Weight Transport: ÃÃÃÃÃÃü " diameter aircraft cable with a 7 x 19 construction and black nylon coating. The cable is rated at a breaking strength of 4,200 lbs.
- Pulleys: 4ÃÃÃÃÃÃý " diameter fiberglass-impregnated nylon with a precision fit cable groove and double-sealed, nonfriction roller bearings.
- Weight Plates: All selectorized equipment features solid steel weight stack plates with a black finish. Self-aligning low friction sleeve bearing surround the guide rods on every weight stack plate.
- Spring Suspension: Heavy-duty die cast springs are used under the weight stack to reduce shock and vibration stresses.
- Guide Rods: Solid steel and hard chrome-plated to ensure quiet operation and low friction movement.
- Lanyard Pins: All selectorized equipment features weight stack pins that are lanyard with a coiled self-storing cord to prevent pin removal or loss.
- Fasteners: All bolts meet ANSI B18.3 specifications.
- Handgrips: 45 durometer rubber handgrips are used for comfort, safety, and durability.
- Made in USA.
|
| Equipment Warranty
|
- Equipment is warranted to the original purchaser
- 12 years on structural welds and frames
- 5 years on bronze bushings, sealed rotating bearings, and pulley wheels
- 1 year on cables, weight plates, guide rods, and all other components not mentioned elsewhere in the warranty
- 90 days on upholstery and grips
|
|
|